Camlok TSS Non-Marking Grab
The TSS non-marking grab with screw spindle is designed for use on stainless steel plates, suitable for most polished surfaces.
This non-marking grab for heavier loads secures its load through a special wedge mechanism. The sliding jaw is manually set to the pre-tension position with a removable handle that is placed on a screw spindle head. During the lifting cycle, the tensioning lever exerts an extra high clamping pressure via a high transmission ratio onto the sliding jaw which is thereby held tight be a ‘friction locking effect’. The contact pressure produced is further enhanced by the inclined plane on which the wedge shaped jaw slides. The grab comes with aluminium and stainless steel jaws for the non-marking transport of loads with sensitive surfaces.
The surface of the plate must be free of oil, grease or any other liquid to ensure safe transport. The TSS with steel jaws is suitable for steel plates with surface roughness (Ra) greater than 0.025µm.
|Part Number||Model||Working Load Limit (kgs)||Jaw Capacity (mm)||Dimensions (mm)||Weight (kg)|
|CL-TSS750||TSS 0.75||6 – 750||0 – 16||50||235||78||72||16||163||12||18||73||6|
|CL-TSS1500||TSS 1.50||10 – 1500||5 – 25||70||285||100||86||25||200||16||20||86||9.3|
|CL-TS3000||TSS 3.00||15 – 3000||5 – 30||82||315||120||95||30||226||20||30||100||15.8|